background image

www.lennoxemea.com

PCUS Thermostat - User Manual - 0821EN

8

9. 

Press the Mode key again to go to time band 2. Leaving the desired action on for now, proceed with setting the 

switch-off time which in our example is 12.00, ignoring the setting of the speed and temperature.
The photo below shows what is indicated in this point

10. 

Press the Mode key to move to the setting of band 3 and select the ON value as the desired action, the desired 

set at 20.0 ° C and the low speed as speed.
The photo below shows what is indicated in this point

11. 

Press the Mode key to move to setting band 4. Leaving the desired action to On for now, proceed with setting 

the switch-off time which in our example is 5.30 pm, ignoring the setting of the speed values and temperature.
The photo below shows what is indicated in this point

12. 

Press the Mode key to switch to the setting of band 1 on Saturday identified by the wording Week 6 and set 

the desired action to OFF

13.

 By pressing the Mode key again, you move to setting band 2 on Saturday identified by the wording Week 6 

and set the desired action to OFF

14.

 By pressing the Mode button again, you move to setting band 3 on Saturday identified by the wording Week 6 

and set the desired action to OFF

15.

 By pressing the Mode button again, you move to setting the band 4 on Saturday identified by the wording Week 

6 and set the desired action to OFF

16.

 By pressing the Mode button again, you move to setting band 1 on Sunday identified by the word Week 7 and 

set the desired action to OFF

17.

 By pressing the Mode button again, you move to setting band 2 on Sunday identified by the word Week 7 and 

set the desired action to OFF

Summary of Contents for PCUS
















Reviews: