10
ANALOGUE INPUTS
NOTE:
When the leds on the
display lit alternatively from
one to the other, you are on
menu mode.
Probe St1
Probe St2
Probe St3
Probe St6
Inlet water temperature.
Outlet water temperature.
Piping temperature at circuit 1.
Piping temperature at circuit 2 (ONLY MODEL Climatic
®
400).
AFFECTED PARAMETERS
For every unit without anti-freeze the minimum outlet water temperature should be 5ºC.
For applications where the outlet water temperature is lower than 5ºC is necessary to use anti-freeze.
Probe St4
Outdoor temperature (with option Dynamic set point).
---
1
SET POINT
Probe status
MAIN DISPLAY
Visualizes:
Inlet water temperature
Active alarms
Press
Probe value
Probe value
Probe value
Probe value
Probe value
MAX: Maximum value for the parameter.
MIN: Minimum value for the parameter.
DEF:
The default value, factory set.
UNIT: The units of measure used.
VAR.: Minimum variation allowed.
Unit for temperature measure:
0: the temperature is visualized on ºC
1: the temperature is visualized on ºF
Unit for temperature measure:
0: the temperature is visualized on ºC
1: the temperature is visualized on ºF
MIN
MAX
1 CIRCUIT UNIT MODEL Climatic
®
200
DESCRIPTION
Code that appears on
the display
DEF
2 CIRCUITS UNIT MODEL Climatic
®
400
0
1
0
0
1
0
UNIT
VAR.
---
1
Press
mode
on off
mode
on off
+
mode
on off
+
>2"
<2"
