Page 8 - IOM BASIC CLIMATIC CONTROLLER
-----
-----
---
Visualizes:
Inlet water temperature
Active alarms
LEVEL 1
LEVEL 2
LEVEL 3
SET POINT
PROBE STATUS
ALARMS
PARAMETERS
PASSWORDS
OPERATING HOURS
Cooling set point
Codes
Set point value
Probe value
Active Alarms codes
Password value (number)
Compressor
operating hours
Water pump operating hours
Amount of hours
Amount of hours
HOW TO GET pARAMETERS AND DEvices
A parameter is an internal program reference containing
important values which can be set to allow the user or
installer to ensure proper operation of the unit.
A device is, the status list of the elements that
comprises the system. Getting to the menu mode
enable the user to obtain a status list for the unit's
devices, this can be used to read the probe
temperatures or the operating hours for example.
All parameters and devices are structure on levels of
visualization as shown bellow:
HOW TO GET TO MENU MODE
Press
and
buttons and release
within two
seconds
, to enable the user to get to the menu mode
To move through the menu on this way
!
Press
and
buttons simultaneously and
release
within two seconds
.
To move through the menu on this way
"
Press
and
buttons simultaneously during
more than two seconds
.
To move through the menu on this way
#
##
##
, press:
To move through the menu on this way
$
$$
$$
, press:
MENU STRUCTURE
Water temperature adjustment menu
Status temperature probes menu
ST1: Inlet water temperature
ST2: Outlet water temperature
ST3 and ST6: Piping temperature
Active alarms Menu
Configuration parameters menu
Password to access
to parameters configuration
Operating hours resources management
(compressor, water pump)
NOTE:
When leds on the display lit alternative from
one to the other. You are on menu mode.
DISPLAY MENU
