Page 4 - IOM BASIC CLIMATIC CONTROLLER
the keyp
the keyp
the keyp
the keyp
the keypad incorpor
ad incorpor
ad incorpor
ad incorpor
ad incorpora
a
a
a
ated on the unit
ted on the unit
ted on the unit
ted on the unit
ted on the unit
READING DISPLAY
This is the 3-digit display, The inlet water
temperature is shown in degrees (default), ºC (when
shows decimal
point), o ºF (do not show the decimal point) . The
following can also be displayed:
- Values of all parameters controlled by the
equipment:
- Cooling set point, cooling differential temperature
- Outlet water temperature (as security)
- Inlet water temperature (regulation)
- Alarm codes.
- The status of all machine functions (operating
hours, delay time etc.)
COMPRESSORS LED
When this LED is continually lit it indicates that the
compressor is operating; however, when it flashes this
indicates that pausing is taking place which is delaying the
compressor start.
MODE / UP BUTTON
Selects the operating mode between the following:
Stand-by / Cool In menu mode, this button acts as a
scroll up or up key (increasing value).
READING DISPLAY
ELECTRICAL HEATER LED
When this LED is continually lit it indicates
that the internal anti-freeze electrical heater
is on, if the led is off, the internal anti-freeze
is off.
ON - OFF / DOWN BUTTON
Turn the unit ON and OFF, Press once to
reset all manually reset alarms not currently
active; all the alarm events per hour will
also be reset even if the alarms are not
active. In menu mode this key acts as a
scroll down or down key (decreasing value).
MODE - ON / OFF BUTTON
Pressing both buttons at he
same time, gets to the menu
level. They also lets move one
level up or down in the menu.
COOLING MODE LED
When this LED is continually lit it
indicates that the unit is operating
in cooling mode.
When the led COOLING is not lit,
it indicates that the operating
mode selected is STAND-BY.
NOT USED
