Lennox Baltic BCK 020, Installation Operating & Maintenance Manual

Page: 64 / 110

IOM / ROOFTOP BALTIC Series - 0
8
03 - E Page 63
SELECT
(1000) 01 Alarm 00 (1000) 01 Alarm 00 (1000) 01 Alarm 00 (1000) 01 Alarm 00 (1000) 01 Alarm 00
01-03/03.12h10 = 127
01-03/03.12h10 = 127
01-03/03.12h10 = 127 01-03/03.12h10 = 127
01-03/03.12h10 = 127
02
02 02 02 02 03/03.12h05 = 125 03/03.12h05 = 125 03/03.12h05 = 125 03/03.12h05 = 125 03/03.12h05 = 125
03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125
Number of
active Alarm
Selected Alarm Alarm Date
and Time
Active * or
Inactive =
RED
RESET
Alarm
code
(1000) 01 Alarm 02 (1000) 01 Alarm 02 (1000) 01 Alarm 02 (1000) 01 Alarm 02 (1000) 01 Alarm 02
01-03/03.12h10*127
01-03/03.12h10*127
01-03/03.12h10*127 01-03/03.12h10*127 01-03/03.12h10*127
02
02
02 02
02 03/03.12h05*125 03/03.12h05*125
03/03.12h05*125 03/03.12h05*125
03/03.12h05*125
03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125 03-27/02.12h03 = 125
(3121) 01 (3121) 01 (3121) 01 (3121) 01 (3121) 01 Zone.A Zone.A Zone.A Zone.A Zone.A
min:8.0
min:8.0
min:8.0 min:8.0
min:8.0
Room set Room set Room set Room set Room set std :20.0 std :20.0 std :20.0 std :20.0 std :20.0
21.0°C 21.0°C 21.0°C 21.0°C 21.0°C max:35.0 max:35.0 max:35.0 max:35.0 max:35.0
Selected Time
zone
"prg" changes
the time zone
(3310) 01 (3310) 01
(3310) 01 (3310) 01 (3310) 01
Zone.A Zone.A
Zone.A Zone.A Zone.A
1-ROOM SET : 1-ROOM SET : 1-ROOM SET : 1-ROOM SET : 1-ROOM SET : 24.0°C 24.0°C 24.0°C 24.0°C 24.0°C
2-Min % FA : 20 % 2-Min % FA : 20 % 2-Min % FA : 20 % 2-Min % FA : 20 % 2-Min % FA : 20 %
(3120) 01 (3120) 01 (3120) 01 (3120) 01 (3120) 01
1-HOUR
1-HOUR 1-HOUR 1-HOUR 1-HOUR 12h 12h 12h 12h 12h
2-Minute 2-Minute
2-Minute 2-Minute 2-Minute
44mn 44mn
44mn 44mn 44mn
3-Day 3-Day
3-Day 3-Day
3-Day 4 44
44
RED
(0000)01 (0000)01 (0000)01 (0000)01 (0000)01 ZoneA ZoneA ZoneA ZoneA ZoneA
1-ALARM 1-ALARM 1-ALARM 1-ALARM 1-ALARM 12h44 12h44 12h44 12h44 12h44
2-Data 2-Data
2-Data 2-Data
2-Data Tuesday Tuesday
Tuesday Tuesday
Tuesday
3-Setting 3-Setting 3-Setting 3-Setting 3-Setting April 03 April 03 April 03 April 03 April 03
control interface dS50
Clock settings
The clock setting menu can be accessed from the main
menu by selecting the menu "SETTING" and then
navigating down through the sub-menus until page (3120).
Selecting the HOUR for displays the page 3121 shown
bellow:
Zone Settings
From Main menu (0000) navigate down to sub-menu
"SETTINGS", zone settings (3310).
In this particular page, pressing the "prg" key, changes the
time zone. If "ROOM SET" is selected, this displays the
room set point for the specific time zone shown in the top
corner.
Pressing the "prg" validates any changes made, and move
to the next time zone. "ESC" does not validate the changes
and move back one step in the menu tree.
Pressing "ESC" at any time sends you back one level up
the menu tree. In the example shown above "ESC" must be
pressed 3 times to go back to the main menu (0000)
Pressing "ESC" will invalidate any changes made to a
value in a setting page.
Alarms
Select the alarm menu using the arrow keys and press
return.
The faults history is then displayed in the page (1000):
Pressing the "ALARM" key resets all the alarms
The number of active alarms goes to 0, no active alarm
shown in the menu, the "bell" key is switched off.
Pressing the "return" key will display details of the selected
alarm
(1100) 01 Alarm 00 (1100) 01 Alarm 00 (1100) 01 Alarm 00 (1100) 01 Alarm 00 (1100) 01 Alarm 00
03/03.12h05 = 125
03/03.12h05 = 125 03/03.12h05 = 125 03/03.12h05 = 125 03/03.12h05 = 125
Compressor 2
Compressor 2
Compressor 2 Compressor 2
Compressor 2
High pres/Elec.power
High pres/Elec.power High pres/Elec.power High pres/Elec.power High pres/Elec.power
(3121) 01 (3121) 01 (3121) 01 (3121) 01 (3121) 01
min:00 min:00 min:00 min:00 min:00
HOUR HOUR HOUR HOUR HOUR STD: STD: STD: STD: STD:
14h 14h 14h 14h 14h max:23 max:23 max:23 max:23 max:23
Validate and
Back One level
Up one
level
Min Setting
Current Setting
Factory
Setting
Max
Setting