IOM / @DNOVA-µAC-0907-E - Page
The entire alarm log can be deleted from within the display
of log itself, by pressing the and buttons together for
5 seconds. At this point the FACTORY password (177) is
required, which, confirmed by enter, leads to the deletion of
the log.
This operation re-initialises the clock board EEPROM and must
be performed when installing the board itself. The alarm codes
displayed are those reported in the table in the chapter on the
alarms; in addition, other special codes have been included to
signal the following events:
code
Meaning
Pron
Machine re-start after power failure
res
Manual alarm reset using the Alarm button
exiting the alarm log
To exit the alarm log menu, press the Alarm button. The menu
is exited in any case by time-out, after 60 seconds.
CLOCK, TIME BANDS AND ALARM LOG
