Page - IOM / @DNOVA-µAC-0907-E
Accessing Factory parameters (F)
The number 0 is displayed and, on the left the lock symbol
, confirming access via password to the procedure.
- The and buttons are used to enter the password
177
,
which is confirmed by pressing the
enter
button.
5 Sec.
The value of the first accessible parameter is then displayed
in the upper right, with the parameter code flashing.
The and buttons can be used to scroll the various
parameters.
Once having entered any level of parameters, one pressing
of the button displays the value, flashing, of the parameter
selected, while the and buttons can be used to
modify such value.
Press
enter
again to temporarily store the new value. Then, using
the and buttons, scroll the parameters menu, repeating
the previous steps for each parameter to be modified. Press
the
alarm
button, on the other hand, to store the modifications
made and exit programming. During all phases of setting
the parameters the open book symbol
is displayed in the
lower left of the display; on the other hand, when setting the
password, a lock
also appears, confirming the presence
of a “block”. The presence of the parameters in the various
families depends on the value of some of these:
1. presence of external air probe;
2. presence of humidity probe;
3. presence of supply air probe.
PROGRAMMING PARAMETERS AND THEIR MODIFICATION
