IOM / @DNOVA-µAC-0907-E - Page
cLocK, tIMe BAnDs AnD ALARM LoG
Functions enabled only with the clock board MAc2cLK000
installed.
clock
time display
Pressing the button displays the current time and date.
Pressing the button once displays the time and the day of the
week (1= Monday, 2= Tuesday, ..., 7= Sunday); pressing it
again displays the date in the format day-month-year.
setting the time
First press the button (keeping it pressed) and then the
Prg
button, keeping both pressed for 5 seconds. The minutes will
begin to flash; use the
and buttons to set the desired
time. Use the Sel button, on the other hand, to select, in
order, the fields: hours - day of the week - year - month - day
of the month. At the end, press the
Prg
button to confirm the
modifications made.
time bands
Entering the parameter rt (see USER parameter modification)
allows the selection of
rt= 1 or 2
, enabling the time band
function. Pressing the
sel
button displays, in sequence, with
the scrolling of a segment, time bands 1, 2, 3, 4 of day 1
(Monday), ............ , time bands 1, 2, 3, 4 of day 7 (Sunday).
The and buttons allow, with 10 minute steps, the start
time of the selected band to be modified, while the
on/oFF
button enables or disables the action of the band itself,
confirmed by the messages ON/OFF on the display.
copying the time bands
If the times set for the bands are also valid for the following
days, these can be simply copied by pressing and holding
the
sel
button for 3 seconds. Once the copy has been made,
the following day is automatically displayed: if this too is to be
copied, release the
sel
button and then press it again for a
further 3 seconds.
CLOCK, TIME BANDS AND ALARM LOG
5 Sec.
3 Sec.
