Operation
50
The bodies are mounted with the contact
angle central to the ground. The contact
angle can be changed with the adjusting
screw (1) if required.
Adjust the adjusting screw (1).
Larger contact angle, notch (4) =>
better heeling.
Smaller contact angle, (5) => better
depth guidance.
Then re-tighten all the screws.
See «Tightening torques, page 65».
11.7.2 Working width per body
The working width per body can be adjust-
ed using wedges (1) which are bolted in
place between the leg (2) and the frog (3).
Three working widths per body are possib-
le.
Narrow side of the wedge (1) pointing
forwards
=> reduced working width per body
Without wedges
=> medium working width per body
Wide side of the wedge (1) pointing for-
wards
=> increased working width per body
1
3
4
5
1
3
2
