Operation
46
The turnover device has a double-acting
turnover ram (1) with automatic locking
and switchover for connection to a double-
acting spool valve.
Lift the plough completely before turning it.
Apply pressure to the hydraulic hose connected to the tractor, marked “P1”.
The plough frame turns through 180°.
When turning is complete, move the control lever to “N” (neutral).
The plough can now be turned again.
11.3
Setting the front furrow width
11.3.1 General information
The front furrow width must be set to correspond to the working width of the fol-
lowing plough base with the Optiquick setting system.
11.3.2 Front furrow width, mechanical
Front furrow too narrow
Turn the outer spindle (1) for longer
Front furrow too wide
Turn the outer spindle (1) for a shorter
time
1
1
