LEM DX 26 PLUS, Manual

Page: 49 / 64

49
M
EMORY
C
ARD SUBMENU
Memory Card Format Card
Allows to format the Multimedia Memory Card.
Formatting is the preparation of the memory areas of the Card. Without formatting (or without compatible
formatting) the Card can’t be used by the system.
M e m o r y C a r d
How to format the Card
☞
Insert a Multimedia Memory Card in the slot.
New or used Cards can be used, providing they are compatible (min 1MB).
ATTENTION! Formatting cancels any data contained in the Card.
☞
In the Memory Card submenu, press ENTER .
The Format Card page appears.
F o r m a t C a r d
☞
Press ENTER .
The system formats the Card until it communicates that it has completed.
This operation only requires a few seconds. The Card is ready to be used.
F o r m a t C a r d
F o r m a t t i n g . . .
F o r m a t C a r d
F o r m a t D o n e !
N.B.: in the event of an error or a Card fault, if there is no Card in the slot or if the Card is removed during formatting,
the display shows the following message:
F o r m a t C a r d
F o r m a t E r r o r !
During formatting, the system automatically stores the *Default* PRESET in all the 128 CARD memory
areas.
N.B.: since the system must always be configured, there are no empty memory areas. All the User and Card areas
not yet used by stored user data are automatically occupied by the *Default* PRESET, which contains a standard
start
configuration with all the values of the various parameters at zero.
UTILITY menu