LELY Splendimo 550 P, Operating Manual

Page: 51 / 122

Innovators in Agriculture
Splendimo 550 P Maintenance 50-3
M
AINTENANCE
I
NTERVALS
“ ac ” = acres and “ ha ” = hectares in table below.

= Regular maintenance interval.
I
NITIAL
= Initial maintenance on new machine. Regular maintenance interval may be different.
Service
Maintenance Interval - Service Hours
Before
Each Use
After First
8 Hours
8 hrs or
Daily
50 hrs or
Weekly
100 hrs or
200 ha
500 hrs or
1000 ha
1000 hrs
or 2000 ha
As
Required
Hydraulic System - Inspect

Machine - Clean

Safety Signs and Operating Decals -
Inspect

Lug Nut - Torque Check

Cutter Drive Gearboxes - Initial Oil
Change
I
NITIAL
Cutter Drive Elements - Initial Oil Change
I
NITIAL
Tongue Pivot - Grease

3-Point Pivot - Grease

Overrunning Clutch - Grease

Primary PTO Shaft - Grease

Secondary PTO Shaft - Grease

Cross PTO Shafts - Grease

Cutter Bars - Check

Overall Machine - Check

Mechanical Drive System - Check

Curtain - Check

Tires and Rims - Check

Cutter Bar Driveshafts - Grease

Jackshaft - Grease

Highway Lights - Check

Hydraulic System - Check

Gearbox Oil Levels - Check

Cutter Drive Elements - Change Oil

Cutter Bar Drive Gearboxes - Change Oil

Swivel Hitch Gearbox (Rear) - Change
Oil

Swivel Hitch Gearbox (Front) - Change
Oil

Cutter Elements - Replace Grease

Wheel Bearings - Check

PTO Shafts - Clean and Grease

Cutter Blades - Replace

Curtains - Check/Replace

Slip Clutch - Check

Slip Clutch Friction Discs - Replace

Timing (Cutter Bars) - Adjust

Preparing for Storage

4.1304.8503.0