LELY Splendimo 550 P, Operating Manual

Page: 10 / 122

Innovators in Agriculture
1-4 Introduction Splendimo 550 P
R
ECEIVING AND
D
ELIVERY
R
EPORT
Dealer Preparation
Check or perform the following:
___ Check that all loose items are included with machine.
___ Inspect safety signs, operating decals, and shields for transit damage.
___ Finish assembling machine. Refer to page 65-1 .
___ Inspect tires and rims for damage.
___ Ensure tires are inflated to 200 kPa (2 bar) and wheel lug bolt torque is 270
Nm (27.0 kgm).
___ Check oil level in cutter bar drive elements and main drive gearboxes.
___ Check condition of cutter bar curtains.
___ Check blade retaining clips for any damage and ensure they are securely
fastened to blade pin and disc.
___ Ensure all cutter blades pivot freely.
___ Check PTO shafts and shielding for proper installation.
___ Ensure hazard signs and lights are installed as shown (1) .
___ Check that correct hydraulic couplers that match tractor are installed and
do not leak.
___ Inspect hydraulic systems for leaks and check for proper operation.
___ Check that reflector decals are installed as shown.
___ Run mower and check all phases of operation.
___ Check transport locks on tongue swing and cutter bar lift functions for
proper operation. Refer to “Transport Locks,”
page 15-1 .
___ Follow Shutdown Procedure , page 20-1 . Check gearboxes and cutter
elements for leakage.
___ Complete “Dealer/Customer Information” on next page.
___ Record model and serial number as described on page 3 .
1
Amber
Amber
Red Rectangular
Amber Round
4.1304.8503.0