LELY Lely Discovery 90 SW, Operator'S Manual

Page: 120 / 150

5.4006.8501.0
B
7-4 Test and Adjustment
3. If a route has a failure probability of more than 2 (see Failure Probability per Route on page 4-21):
1. Make a note of the route number.
4. Push to confirm and go one level up.
Because a route can not be modified, you have to delete an unreliable route and to make
a new one. Before doing so it is good to figure out what is wrong.
To Analyse the Cause of an Unreliable Route
1. Select Failure analys and push .
2. Select the noted route number and push .
3. Make a note of the fault categories (A-E) that have an (action) number and note the numbers (see
Failure Analysis on page 4-22).
4. Push and make a note of the fault categories (F-H) that have an (action) number and note the
numbers.
5. Make a note of the percentage bump points.
6. Make a note of the percentage short routes.
7. Push and look up the explanation of the noted fault categories (A-H).
8. Make sure you understand the explanation of the noted fault categories.
9. Make a test route and find out where the notes risky action numbers appear (see Test a Route on
page 7-4).
10. Delete the route (see Delete a Route on page 5-28).
11. Make a new route.
7.3.2 Test a Route
1. Put the route into a manual route.
2. Start the manual route (see Start, Stop or Pause a Manual Route on page 5-32).
3. Find the actions and action numbers on the display of the user interface of the Lely Control app.
4. Make sure the route is correct.
7.3.3 Make sure the Battery is Charged
1. Stop the time path to take the machine out of operation (see Start or Stop the Time Path on
page 5-32).
2. In the main menu of the Lely Control app, select Work and push .
in n o vato rs in ag ric u ltu re