LELY HIBISCUS 485 P, Operator'S Manual

Page: 16 / 22

E-14
6 DISMOUNTING FROM THE TRACTOR
The machine can be dismounted from the tractor both in the working
and in the transport position.
Always place the machine on hard, even ground.
- Switch off the tractor engine.
- Block the effect of the rams by closing the ram valves (fig. 17).
- Fit the parking jack to the draw bar.
- Extend the parking jack so the draw bar eye is no longer resting
on the draw hook.
- Disengage the PTO shaft from the tractor PTO.
- Place the PTO shaft in the hook (fig. 18).
- Depressurize the hydraulic system and disconnect the hydraulic
hoses.
- Place the dust caps on the plugs and hang the plugs to the support
on the headstock (fig. 18).
- Remove the plug for lightning from the tractor socket.
- Remove the pin from the draw bar clevis.
17
18