23
Extended guide
1. The lighted frame of the main switch (8) flashes continuously
a. Turn the machine OFF and ON and wait for the machine to get to the right
temperature (24 min).
b. The machine goes OFF.
c. The Standby function is ON. Follow the instruction manual to learn how to disable
the function (chapter 10).
2. The coffee is too cold
a. The machine needs 24 minutes to get to the right brewing temperature: the pilot
light (4) will remain ON after 24 minutes.
b. Select a higher temperature range by switching the 3-position switch (9).
c. Do not forget to warm up the cups before the extraction: keep the cups on the top
surface of the machine.
d. Insert the filterholder without coffee into the group, lift the group lever (14) and let
some hot water come out of the group head. Proceed with the coffee extraction.
3. The coffee is dispensed too quickly and without cream
a. Grind the coffee more finely or use a finer ground coffee.
b. Increase the coffee quantity in the filterholder.
c. Press the coffee more firmly.
d. Change the coffee blend.
e. If the above suggestions do not improve the result in the cup, test the machine with
the blind filter: insert the blind filter into the filterholder, fix the filterholder into the group
head and lift the group lever (14). If the pump manometer reaches 9 bar (or more) it
means that the machine works correctly.
4. The coffee is not dispensed or is only dispensed in drops
a. Grind the coffee more coarsely or use a coarser ground coffee.
b. Reduce the coffee quantity in the filterholder.
c. Press the coffee less.
d. If the above suggestions do not improve the result in the cup, test the machine with
the blind filter: insert the blind filter into the filterholder, fix the filterholder into the group
head and lift the group lever (14). If the pump manometer reaches 9 bar (or more) it
means that the machine works correctly.
18. Most common problems
EXTRA
