background image

11

3.14  Training mode and making a conference call

Your Leitner headset allows a second headset to be temporarily connected to the base for 
training or conference calls

•  Turn on the primary headset
•  Place the second headset on the charging base*
•  The Online Indicator light on the secondary headset will turn on and the primary  

 

 

base’s 3rd LED light will flash to indicate that the headset is registering with the  

 

 

base unit

•  Once the registering has completed, the LED light on the base will stop flashing and  

 

 

the headset’s Online Indicator will begin flashing

•  If the secondary headset has Automatic Answer enabled (section 3 .18), it will 

 

 

automatically connect when you lift it from the base . If it has Automatic Answer 

 

 

disabled, press the ON/OFF button on the secondary headset to connect

NOTE: The secondary headset will stay registered to the base for the duration of the call . 
Turning off either headset will return the secondary headset to its normal state . Returning 
either headset to its original base will also end training mode . It takes about 10 seconds for 
the secondary headset to re-register to its original base

*Your SmartSet headset can only be conferenced with another SmartSet, LH270, or LH275 headset

Summary of Contents for SmartSet 370





















Reviews: