Leister WELDPLAST S1, Operating Instructions Manual

Page: 36 / 116

36
Warnings and error messages
• If there is a warning pending, the user can continue to work without restrictions. You can access more detailed
information about the warning in question via the function display (27) by selecting «Show Warnings» in the
Settings menu .
• If an error occurs, the heating is switched off and the drive is no longer released.
Message type Display
Error
code
Error description
Warning —
Warning symbol in the status display (30) .
The carbon brushes in the drive needs to be replaced.
The drive can continue to be operated for 5 hours after
the warning symbol first appears. After this time, the error
message «
Error No.0400 » appears. From this point, the
drive is no longer released.
Error
0001
Device has overheated.
Allow the device to cool down.
0020 Air heating element is faulty.
Error!
Contact Leister
service center.
0004 Hardware error.
0008 Air thermocouple is faulty.
0010 Plast thermocouple is faulty.
0040 Plast heating element is faulty.
0100 Blower is faulty.
0200 Communication error.
0400 Drive carbon brushes or overheated drive.