Leister WELDPLAST S1, Operating Instructions Manual

Page: 35 / 116

35
Defining profiles
• Editing an existing profile (excluding Leister profiles):
– In the working display (28), set the required setpoints using the «Plus» or «Minus» keys (24/26).
– In the function display (27), select the Settings menu with the «Plus» key (26) .
– In the «Setup» menu, select «Save Profile» with the «Plus» key (26) .
– Select the profile you want to edit and confirm with the relevant key (25) .
– In the function display (27), select the «Edit selected item» symbol and confirm with the relevant key
(25) .
– Enter the desired profile name (see "Entering names or passwords" chapter), then select the symbol
with the «Plus» key (26) and confirm with the relevant key (25) .
– In the function display (27), confirm the selected «Save» symbol with the relevant key (25) . The
profile has now been successfully saved and selected.
Machine setup
Menu Function
Select Unit
Setting the unit used:
– metric/imperial
LED Mode
LED mode:
– ON*: The LED light can only be switched on if the drive is
released. As soon as the drive is released, the LED symbol
appears in the function display (27) . This symbol allows you
to switch the LED light on/off as you wish. The LED mode is not
changed.
– ON: The LED light is permanently switched on.
The LED symbol is displayed in the function display (27) .
This symbol allows you to switch the LED on/off as you wish.
The LED mode is not changed.
– OFF: The LED light is permanently switched off.
LCD Contrast Setting the LCD contrast
LCD Backlight Setting the backlight for the display
Key Backlight Setting the backlight for the keyboard