Leister WELDPLAST S1, Operating Instructions Manual

Page: 24 / 116

24
Operating unit description
Display description
Status display «Section 1» (29)
PE-HD
Profile currently selected. If profile names consist of more than 6 characters, the first 6 characters
are shown first, followed by the remaining characters.
1m16s Time remaining until the drive is released (1 min. 16 sec.)
Status display «Section 2» (30)
Drive released
Drive not released
Warning (carbon brushes / drive)
Key lock (only appears when key lock is activated)
Air and plasticizing heating is switched on
Keyboard mode
Current selection in the working
display
Current selection in the function
display
Up (21)
Down (22)
Changes the item within the wor-
king display Changes from the function display
to the working display
Heating
on/off
(23)
No function
Changes from welding mode to the
cooling process
Changes from the cooling process
to welding mode
Changes from the start display to
welding mode
Minus (24)
Plus (26)
(press briefly)
Sets the required setpoint in 5°C or
5% stages. Changes the item in the function
display
Minus (24)
Plus (26)
(press and hold)
Sets the required setpoint in 10°C
or 10% stages. Changes the item in the function
display
Confirmed (25)
Set value is adopted straight away
and the selection goes straight back
to the function display
Selected function is executed