11
• Once you have prepared the working area and the semi-automatic hot-air welder in accordance with the
description, connect the device to the mains voltage.
• Now switch on the heating
("Heating on/off" key, 16).
After connection, the
start screen
appears briefly on the display of the
operating unit (3)
with the version number of the current software release and the device designation.
If the device was allowed to cool down beforehand, this will be followed by a static display
of the setpoints for the most recently set welding parameters.
At this stage, the heating, blower and drive are switched off.
Tool resting position
• Place the semi-automatic hot-air welder on a horizontal and fireproof surface.
• The semi-automatic hot-air welder is placed on its back for the resting position (heating, cool down mode).
6.4 Starting the device
