29
In this view, you can change the machine settings. Depending on the user logged in, certain settings are locked or not visible.
To display or change all settings, log in as “Admin”. (See also the table of authorizations for individual users). The following
adjustments can be made:
If you have made a change, you can select the “Save” button to permanently save this adjustment. The next time the system
is started up, this new setting will be automatically loaded.
If “Reset” is selected, the standard values described above can be loaded.
8.7 Machine Settings
Setting
Description
Language
In the language selection tab, choose your standard language. Selecting “Save” saves your
choice and your language is automatically preselected when the system is re-started. The
standard language is English (EN)
Auto reverse distance
Distance that the material is lead back at the end of the weld. With the correct setting, you can
achieve a seamless and leak-proof weld seam. As standard, 2 to 3 mm is to be selected.
Upper wheel diameter
Diameter of the upper roller. Standard 63.5 mm
Lower wheel diameter
Diameter of the lower roller. Standard 63.5 mm
Motor gear teeth
Number of gear teeth on the roller shaft. Standard 18
Driven gear teeth
Number of gear teeth on the motor shaft. Standard 26
