24
Device description
CLASSIC, PREMIUM, SYSTEM
1
Mounting straps
2
Connection housing cover
3
Screws for connection housing
4
Heating element tube
5
Cable gland for mains connection
(mounted ex works)
6
Locking screw
(enclosed in the connection housing)
7
Cable gland for interface
8
Air inlet
PREMIUM, SYSTEM
LHS 15, LHS 21 S, LHS 21 L, LHS 41 S, LHS 41 L:
CLASSIC, PREMIUM, SYSTEM
LHS 61L, LHS 61 S:
CLASSIC, PREMIUM, SYSTEM
1
1
1
1
4
4
2
2
3
3
3
3
3
3
5
5
7
6
8
8
9
9
9
Potentiometer for temperature setting
SYSTEM
10
Display for showing the setpoint and actual values
(°C or °F)
10
• Remove LHS air heater from the packaging.
• Remove the
connection housing cover (2)
by loosening the
screws (3
).
• Remove warning slip, read carefully and keep at hand for consultation.
• Remove
locking screw (6).
• If no interface is connected, the
cable gland (7)
must be removed and the
locking screw (6)
mounted.
• The installation must ensure that
– only cold air is supplied.
– no excess (heat) residue builds up.
– the device is not subject to jets of hot air from another device.
• Protect the device from mechanical vibrations and shocks.
• Fasten the device on the
mounting straps (1)
.
• For installation dimensions, see pages 3, 4, 5, 6 (Size)
Preparation
Installation
10
www.mikst.ru - Leister в России.
