GS25, Operation
41
Insert and remove a
SIM card
step-by-step
LED indicators
Description
Each slot-in-device for a radio or digital cellular phones has
L
ight
E
mitting
D
iode indi-
cators on the bottom side. They indicate the basic device status.
Diagram
Description of the LEDs
Step
Description
The SIM card is inserted into a slot on the side of the SLG1-2.
Take the SIM card and a pen.
1.
Using the pen, press the small button of the SIM card slot to eject the SIM
card holder.
2.
Take the SIM card holder out off the SLG1-2.
3.
Place the SIM card into the SIM card holder, the chip facing up.
4.
Insert the SIM card holder into the SIM card slot, the chip facing the connec-
tors inside the slot.
GR10_011
2
1
a) Power LED
b) Signal strength LED
c) Data transfer LED
d) Mode LED, available for Satelline 3AS
IF the
on
is
THEN
Mode LED
SLR5 with Satel-
line M3-TR1
red
the device is in the programming
mode controlled from the PC via
cable.
Data
transfer
LED
any device
off
data is not being transferred.
flashing green
data is being transferred.
GR10_012
a b c d
