GS25, Operation
34
Connect USB cable
to PC for the first
time step-by-step
6.
The
Ready to Install the Program
window appears.
7.
Install
. The drivers will be installed on your PC.
For PCs with Windows Vista or Windows 7/Windows 8 operating
system: If not already installed, Windows Mobile Device Center will
be installed additionally.
8.
The
InstallShield Wizard Completed
window appears.
9.
Check
I have read the instructions
and click
Finish
to exit the wizard.
Step
Description
Step
Description
1.
Start the PC.
2.
Plug the GEV234 cable into Port P1 of the instrument (GS25).
3.
Turn on the instrument.
4.
Plug the GEV234 cable into the USB port of the PC. The
Found New Hard-
ware Wizard
starts up automatically.
5.
Check
Yes, this time only
.
Next>
.
6.
Check
Install the software automatically (Recommended)
.
Next>
. The
software for
Remote NDIS based LGS GS Device
will be installed on your
PC.
7.
Finish
.
8.
The
Found New Hardware Wizard
starts up automatically a second time.
9.
Check
Yes, this time only
.
Next>
.
10.
Check
Install the software automatically (Recommended)
.
Next>
. The
software for
LGS GS USB Device
will be installed on your PC.
11.
Finish
.
For PCs with Windows XP operating system:
12.
Run the ActiveSync installation program if not already installed.
13.
Allow USB connections inside the
Connection Settings
window of
ActiveSync.
For PCs with Windows Vista or Windows 7/Windows 8 operating system:
14.
Windows Mobile Device Center starts up automatically. If does not start
automatically, start Windows Mobile Device Center.
GS25_005
P4
E2
P1
E1
DVD
4
3
2
