91
Programs
TPS400-5.0.1en
Offset:
Calculated perpendicular distance
between target point and plane
(intersection point).
S
X:
Perpendicular distance from the
intersection point to the local Z-axis.
S
Z:
Perpendicular distance from the
intersection point to the local X-axis.
The stake out point is higher than
the origin of the coordinate system.
[New Tgt]
To measure a new target point.
[STAKE]
To display stake out values for the
intersection point.
[New Plane]
To define a new reference plane.
[EXIT]
Goes to the programs menu.
Coding
Codes contain information about recorded points.
With the help of coding, points can be assigned to a
particular group simplifying later processing.
More information on coding can be found under
"Data management".
GSI-coding
Code: Code name
Desc.: Additional remark
Info1: more, freely editable
...
information
Info8: lines
)
Codes are always stored as free codes
(Wi41-49), that means that codes are not directly
linked to a point. They are stored before or after the
measurement depending on the setting made.
Point codes (Wi71-79) are not available.
