69
Programs
TPS400-5.0.1en
The following entries are possible:
:
Parallel offset of the reference line
to the right, referred to the direction
of the base line (BP1-BP2).
Line+:
Longitudinal offset of the start point
(=reference point) of the reference
line in the direction of base point BP2.
:
Rotation of the reference line clock-
wise around the reference point.
:
Height offset; the reference line is
higher than the selected reference
height.
3. Selecting the subapplication
[MEASURE]
Starts the subapplication to measure
Line & Offset (see issue 4).
[STAKE]
Starts the subapplication to stake
out (see issue 5).
4. "Line & Offset" subapplication
The "Line & Offset" subapplication calculates from
measurements or coordinates longitudinal, parallel
offsets and height differences of the target point
relative to the reference line.
NewBL MEASURE STAKE SHIFT=0
REFERENCE LINE - MAIN 1/2
Length :
14.872
m
Enter values to shift line:
Offset :
1.000 m
Line
:
0.500
m
Height :
0.900
m
Rotate :
25.0000
g
