82
Programs
TPS400-5.0.1en
)
During use of the application the previous
Orientation and Station parameters will be replaced
by the new calculated ones.
COGO (optional)
)
The application COGO can be started in
total 15 times for trial. Afterwards you have to enter
the license code.
COGO is an application program to perform coordi-
nate geometry calculations such as:
•
coordinates of points
•
bearings between points
•
distances between points
The COGO calculation methods are:
•
Inverse & Traverse
•
Intersections
•
Offset
•
Extension
Softkeys:
[MEAS]
Jumps to the Measurement dialog to
measure the point.
[Calc]
Starts the calculation, when all required
data is entered.
[STAKE]
When the calculated point is displayed
you have the option to stake out this
point directly.
