21
Leica ST4020
4. Instrument Setup
Installing the rinsing water containers
(continued)
Hose 1
Hose 2
Hose 3
Area of
the drainage
tank
Fig. 23
Fig. 22
shows how the hoses
are routed in the instrument.
If you want to work entirely
without water, no further steps
are necessary – simply do not
connect a water supply line to
the instrument.
Place the rinsing water con-
tainers (
6
) in the desired posi-
tion on the platform. Start with
the station closest to the drain-
age tank.
Insert the rinsing water con-
tainer so that the hose connec-
tion (
5
) points to the exit tank
(
Fig. 23
).
Fig. 22
Fig. 24
6
Marking 1
The hose (
15
) should run level
along the bottom of the instru-
ment.
Mark the end of the hose that
will connect to the rinsing wa-
ter container.
This is "Marking 1".
15
5
