30
Instructions for Use V1.2, RevE – 08/2016
5.4 Setting the rinsing water flow rate
• First set a staining time of 60 seconds. To do this, press
MENU
once, and then press the
PLUS
key repeatedly until a process-
ing time of 60 seconds is displayed.
• Then press the
ENTER
key to confirm this processing time.
• Now press
RUN
. The countdown of station time will be dis-
played while the rinse water valve inside the unit activates.
• Now slowly open the water tap to which the supply hose is
connected. Adjust the flow rate so that a sufficient amount of
rinsing water flows into the rinsing water container and the
rinsing water can drain off freely.
To set the flow rate for the rinsing water, proceed as follows:
• Once the flow rate is adjusted properly, press the
PAUSE/
STOP
key twice, and then press the
ENTER
key to reinitialize
the mechanism when prompted by the instrument.
DO NOT adjust the flow rate too high. This can cause
spills on the platform to the next stain station or can
overflow the drain area of the stainer.
5. Operation
2x
