26
Instructions for Use V1.2, RevE – 08/2016
5. Operation
There are six pushbuttons on the control panel, and these are used to adjust
the operating parameters and control the instrument.
The keys have been assigned the following functions:
Control panel functions
(continued)
The operating parameters can be displayed and checked with the
MENU
key.
Each time the
MENU
key is pressed, another one of the six operational
parameters will be displayed.
Whenever a new setting is made, it will take effect immediately. Further-
more, since all settings are saved in memory, it will automatically be used
the next time the system is powered up.
The operating parameter that is currently being displayed can be raised
or lowered by pressing the
PLUS
('+', increases the displayed value) and
MINUS
('–', reduces the displayed value) keys respectively.
Pressing the
PAUSE
/
STOP
key allows the operator to exit the setup menu
without changing the1 parameter currently being displayed.
While running:
Pressing
PAUSE
/
STOP once
interrupts the current staining operation so
that another slide carrier can be placed in the Lift Bar.
Pressing
PAUSE
/
STOP twice
(in quick succession) terminates the current
program, and the system returns to idle mode.
If the
ENTER
key is pressed, the selected parameter is stored in the system.
The system returns to its idle mode whenever a new setting is entered, or
whenever the user exits the setup menu by pressing the
PAUSE
/
STOP
key.
Pressing the
RUN
key starts a staining operation on the basis of the values
shown in the display. At the same time, the flushing valve is activated, the
display changes, and the timer appears, counting down to show the
remaining processing time.
