6-6
Rugby 55
Accuracy Adjustment
In adjustment mode...
•
The X-axis LED is used to indicate changes to the X and Z axes (a).
•
The Y-axis LED is used to indicate changes to the Y axis (b).
To enter adjustment mode perform the following steps:
•
Turn the power off.
•
With power off, press and hold both the LEFT and RIGHT arrow buttons,
then press the ON button. The active axis is the X-axis (a).
•
If done correctly, the following sequence of events will occur:
1.
The X and Y-axis LED’s will flash alternately three times.
2.
The X-axis LED will flash three times, then flash slowly until level.
3.
The Y-axis LED will be off.
4.
When leveled, the X-axis LED will turn ON (not blinking).
a
b
x
y
