3-5
Rugby 55
Accessories
3.3
The Ceiling Grid Target
The Ceiling Grid Target
•
Allows the user to visually detect the rotating or scanning beam
throughout the jobsite.
•
The ceiling grid target’s magnet attaches to the ceiling grid.
•
The beam can be viewed as it reflects off the foil on the back of the target,
or through the target at the sides of the foil.
•
The ceiling grid can then be adjusted until the beam is hitting the center
line of the target.
•
A small bracket on the back of the target allows the target to be set up
over a control point for layout alignment (a).
a )
