4-4
Rugby 55
Applications
4.3
Using the Rugby with a Receiver
•
The rotating beam creates a level plane of laser light over
the entire jobsite as a reference. Use the Rugby together
with a receiver when outdoors or in bright light conditions
to locate the position of the beam.
•
Place the Rugby on a flat, level surface or tripod. Place the
Rugby in a location where the rotating beam will be at a
convenient height and will not be obstructed.
•
Press the On/Off Power Button to turn on the Rugby. The
Rugby will always turn on in automatic mode. Allow the
Rugby to self-level.
•
Press the Head Speed Button to the fastest setting, 10-
rps.
•
Use the plane of laser light as a reference to take eleva-
tion readings.
•
Attach the receiver to a grade rod or stick. Position the
rod over a control point and adjust the height of the
receiver until it is centered on the laser beam. The
receiver’s bandwidth and audio volume can be adjusted
using the buttons on the receiver.
