28
Instruction manual V 1.4 – 02/2010
5.7 Changing the specimen or interrupting sectioning
Lock the handwheel and cover the knife edge with the knife guard
prior to any manipulation of knife or object head, as well as prior
to changing the specimen block and during all work breaks!
•
Raise the specimen to the upper end position and activate the
mechanical handwheel lock.
•
Cover the sectioning edge with the knife guard.
•
Remove the specimen from the specimen clamp and mount a new
sample to continue.
•
Run the object clamps with the coarse driving wheel back far enough
until the new specimen can start being cut.
5.8 Finishing daily routine
•
Raise the specimen to the upper end position by turning the handwheel
and engage the handwheel lock.
Always remove the knife / blade before detaching the knife holder
from the instrument.
Always put the knives back into the knife case when not in use!
Never place a knife anywhere with the cutting edge facing up-
wards and never try to catch a falling knife!
•
Remove the blade from the knife holder and insert it in the receptacle
at the bottom of the dispenser, or remove the knife from the knife hold-
er and put it back in the knife case.
•
Remove the specimen from the specimen clamp.
•
Push all section debris into the section waste tray and empty the tray.
•
Clean the instrument (see
Chapter 8.1
).
5.
Operation
Summary of Contents for RM2235
Page 2: ......
