Leica RM2235 User Manual Download Page 13 | Manualshive

Page: 13 / 56

background image

13

Leica RM2235

3.

Instrument components and specifications

3.2 Instrument specifications

Basic instrument with mechanical trim function, lateral coarse drive

The Leica RM2235 rotary microtome is equipped with a low-maintenance,-
slack-free micrometer drive, with vertical and horizontal specimen feed
realized via low-maintenance cross roller bearings.

The instrument is equipped with two independent handwheel locking
systems for even greater operating safety.

Leica's patented, user-adjustable force balance system compensates
centrifugal forces arising while cutting via a pretensioned spring for
extremely light handwheel action.

Benefit: a heavy counterweight in the handwheel is no longer needed. The
spring tension is individually adjustable, corresponding to the weight of
the respective attached specimen clamp or specimen.

The patented specimen retraction system can be switched on and off by
the user. The instrument thus offers all of the advantages of specimen
retraction while supporting work in "rocking mode", i.e. without a full
handwheel rotation.

We recommend disabling specimen retraction when working in "rocking
mode".

The coarse drive wheel is ergonomically positioned.
(For more information on the rotating direction, see

chapter 5.1.2

)

«
...
11
12
13
14
15
...
»

Summary of Contents for RM2235

























































Reviews:

No comments

Related manuals for RM2235

Brand: GE Pages: 698

Brand: Bard Pages: 36

Brand: Bard Pages: 2

Brand: Bard Pages: 30

Brand: Bard Peripheral Vascular Pages: 44

Brand: Halyard Pages: 88

Brand: HALDER Pages: 2

Brand: Yamaha Pages: 31

Porta PlumeSafe 604

Brand: Buffalo filter Pages: 75

Brand: Hettich Pages: 104

Shark Beam FX one

Brand: SHOWTEC Pages: 32

Brand: morse Pages: 3

Pivot track filler

Brand: Norwest Pages: 16

Brand: ResMed Pages: 9

OMNISTIM FX2 CYCLE/WALK

Brand: Accelerated Care Plus Pages: 30

Brand: g-lites Pages: 24

Brand: WAGO Pages: 66

Brand: Zodiac Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands