98
iCON grade iCP42, 3D Run Mode
Coordinate systems in
the old formats
(GTR, CSD, GRD, TPF)
1. Transfer coordinate system files to the current
project, for example with USB.
2. Go to
Settings
>
Localisation
>
Old SBG
formats
(first page).
3. Go to page 2 of this screen using the
or
arrows.
4. Specify whether the
GTR file
is stored in the
global folder or project folder in the list on the
left. Select GTR file from the list on the right.
5. Specify whether the
CSD file
is stored in the global or project folder in the list on the
left. Select the CSD file from the list on the right.
6. For
local transformations
, check the box on the right, specify if the
TPF file
is stored
in the global or project folder in the list on the left. Select the TPF file from the list on
the right.
7. If a geoid model is used by the TPF file, check the box on the right, specify if the
Geoid
file
is stored in the global or project folder in the list on the left. Select the geoid file
from the list on the right. Observe that the geoid file must be stored in the global folder.
Refer to "Transferring a geoid model to the system", page 100, for more information.
