100
iCON grade iCP42, 3D Run Mode
Transferring a geoid
model to the system
Geoid models must be stored in the global folder.
Upgrade files with geoid models and coordinate systems can be found on the USB memory
supplied with the system or downloaded via iCON telematics.
7. Select the appropriate localisation from the Transformation list. Observe that available
options in the list are read from trfset.dat, stored in the PowerBox.
If the localisation is performed in the machine control software,
Transformation
must be set to
WGS84
.
1. Create a folder on a USB stick and name it
system
. You can use any USB stick.
2. Copy the DAT file and paste it into the system
folder.
3. In the machine control software, go to
Tools >
About > Upgrade
.
4. Press
USB
.
5. Select the appropriate DAT file from the list.
6. Press
OK
.
7. Follow the instructions on the screen.
