114
iCON grade iCP42, iCON gps 80
Operating the iCON gps
80 receiver with
external radio
The settings for the selected iCON gps 80 profile can be found at:
Main menu > Settings > Instruments
1. Select “External Radio (P2)” as RTK device.
The RTK message is automatically detected.
2. Select the brand of the RTK base sensor. If it is a
Leica Base you can select “Auto detect”.
3. Enter the settings by pressing the
button.
4. Set the correct baud rate of the external radio.
5. Enter flow control ON/OFF.
6. Enter which mode for the connection base ID is
used.
7. Exit the settings page by pressing the
button. You will be asked to save the settings.
Press “Yes” if the settings are correct.
Pressing “No” will undo the settings.
Ask the site supervisor about the radio connection details used.
