manualshive.com logo in svg

Leica iCON grade iCP42, User Manual

Share
Download
Leica iCON grade iCP42 User Manual Download Page 37

iCON grade iCP42, Operation

37

Caution

System Components can protrude from the machine, which could lead to bodily injury and/or 
product damage.

Precautions:

Exercise caution in operation to avoid striking any objects or persons near the working area.

3.4.2

Operation with the Tri-Sonic Sensor

iCP42 system flexibility

Multifunctional and multitask - iCP42 system can be operated in various combinations for 
the most demanding job requirements.

Mount the Tri-Sonic

Mount the Tri-Sonic to the appropriate height for its maximum performance according to 
the reference used. The sensing range shows the minimum and maximum values possible, 
wherever it can be achieved to obtain the range of best performance.

Sensing range

Reference

Sensing Range 

Best Performance

String

15-36 inch (38-91 cm) 

24 inch (60 cm)

Edge

15-36 inch (38-91 cm)

24 inch (60 cm)

Flat Ground 

15-99 inch (38-250 cm)

24 inch (60 cm)

Summary of Contents for iCON grade iCP42













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands