17
HistoCore Arcadia C – Cold Plate
4. Setting up the instrument
Fig.8
•
Connect the power cord plug (
7
) to the
connecting port (
6
).
•
Plug the power cord into the wall outlet.
4.5 Power supply
The HistoCore Arcadia C refrigeration unit requires a specific voltage and frequency (refer to
"Technical data" chapter
), and is therefore always delivered with a power cord that fits the
instrument.
Please observe the following notes to prevent damage to the instrument.
Before connecting the instrument to the power supply, it is mandatory to check whether
the voltage specified on the identification label (rear side) matches the actual voltage
values at the installation location.
If this is not the case, the connection must not be made!
The unit must be connected only with the supplied power cord and only to a grounded
power receptacle.
Do not use an extension cord!
6
7
