8
Instructions for Use V 1.7 Rev. J – 12/2017
2. Safety
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis
for accident prevention. Operating the instrument safely is, above all, the responsibility of the
owner, as well as the designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
Warnings – Safety notes on the instrument itself
•
This device may only be used by trained laboratory technicians. It must only be
operated for the purpose of its designated use and according to the instructions
contained in these Instructions for Use.
•
Safety notes on the instrument itself, which are marked with a warning tri-
angle, indicate that the correct operating instructions (as defined in these
Instructions for Use) must be followed when operating or replacing the item
marked. Nonobservance can cause accidents, injuries and/or damage to the
instrument/accessories.
To prevent damage to the instrument or the specimen, only accessories authorized by
Leica Biosystems may be used.
Safety instructions - Transport and installation
•
After unpacking the instrument it may only be transported in an upright position.
•
Before connecting the device to a power source, ensure that the voltage indicat-
ed on the type plate matches the voltage available at the place of installation.
•
The unit must be connected only with the supplied power cable and only to a
grounded power receptacle. Do not use an extension cord.
•
The power socket to which the instrument is connected has to be near the
instrument and easily accessible.
