Leica GR10 Operational Manual Download

Page: 69 / 317

Printed Documentation

Status

Status: Overview

View the status of important receiver information, such as the configured logging sessions, the satellite tracking, an

overview of the ports in use and the power and memory available.

Menu option

Description

Receiver information

View detailed information about the receiver, including the installed firmware

version, maintenance data and options.

Position

Shows the currently navigated position, the user entered reference position and
the DOP values.

Tracking

The general page provides an overview of the received almanac for each satellite

system and the health information for all satellites.

Each satellite system tab shows the satellites tracked on each frequency and their

current status information such as elevation, azimuth, SNR values and health.

Available tabs:

•

•

•

•

•

Data streams

Displays a list of all configured

outgoing data streams

and all

incoming data

streams

from attached devices (meteo and tilt devices).

Logging sessi ns

View detailed information about the configured logging sessions.

Port summary

Shows all configured open ports, their connections status and the data stream
used for this port.

Event log

View and filter the history of messages regarding the receiver status.

Network connections

Lists all active TCP/IP network connections on the receiver and their status.

System resources

Shows the status of the connected power supply and the used/free space on the
inserted SD card.

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands