Leica GR10, Operational Manual

Page: 94 / 317

6: Context sensitive help
GNSS management: Site name and coordinates
Background Information
Site name and coordinates is used to enter the reference station information that will be used for real time correction
messages and raw data logging.
Changing the site name and/or coordinates interrupts logging and streaming. If any of these
settings are changed when a logging session is active then the current files will be finalized and
new file(s) will start to be logged.
Setting Descriptions
The table below describes the settings that can be configured on the Site name and coordinates page.
Naming Description
Site name
Enter the name of the site. This is a unique identifier for the location of the receiver.
The site name field can be left blank.
•
The maximum number of characters is 16.
•
Only certain ASCII characters are allowed.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Site code
Enter a four character site code as an identifier for the instrument. The code is used
for the first four characters of the raw data (MDB and RINEX) file names.
•
The maximum number of characters is 4.
•
Only certain ASCII characters are allowed.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ (hyphen and underscore are also allowed)
93