Leica GR10, Operational Manual

Page: 90 / 317

6: Context sensitive help
Status: Network connections
Background information
Displays all active network connections used to connect the receiver to a network, including DynDNS setup if
configured.
Possible connections
•
Ethernet
•
TCP/IP over USB
•
Mobile internet
•
DynDNS
Field Descriptions
The table below describes the fields in the Status: Network connections page.
Default gateway
shown in the status header indicates if the specific connection is set as the main gateway.
Press the
Refresh icon
to update the displayed data.
Ethern t e Description
Status
The status of the configured ethernet connection,
Connected
or
Disconnected
.
IP address ype t
Indicates if the IP address was assigned by DHCP or manually configured.
IP address
The IP address used for accessing the receiver via ethernet connection.
Subnet mask
The subnet mask for the connection.
Gateway
The gateway for the connection.
DNS servers
The IP addresses of the DNS servers that are used.
Data sent
The amount of data sent out from this connectio . n
Data received
The amount of data received by this connection.
MAC address
The MAC address of the receivers ethernet device.
Mobile internet Description
Status
The status of the configured network connection,
Connected
or
Disconnected
.
Duration
The duration or uptime of this connection without interruption.
IP address ype t
Indicates if the IP address was assigned by DHCP or manually configured.
IP address
The current IP address of the connection.
Subnet Mask
The subnet mask for the connection.
Data sent
The amount of data sent out from this connection.
Data received
The amount of data received by this connection.
Dev e name ic
The name of the mobile internet device used for this connection.
Port
The port used for connecting the mobile internet device.
89