Leica GR10 Operational Manual Download Page 93

Page: 93 / 317

Printed Documentation

GNSS management

GNSS management: Overview

Configure all GNSS data related settings, such as logging sessions, data streams and the tracking settings. Or enter

site specific information such as the site name, position and antenna details.

Menu option

Description

Site name and coordinates

Enter the site name and coordinates of the receiver.

Data streams

Create, configure and edit incoming and outgoing data streams.

Logging sessions

Create, configure and edit logging sessions for writing MDB, RINEX or

Hatananka files.

Enable or disable the Smart clean-up of logging session data on the
receiver to ensure optimal use of the SD card size and data availability.

FTP locations

Configure, edit and delete FTP locations that are used to push data
created by a logging session on the receiver to an external FTP server.

Antenna management

Select the used reference station antennas and configure, edit or delete all
available antennas.

Tracking

Configure the satellite tracking settings.

•

•

•

•

Configure, edit and delete specific intervals for the receiver to be turned on
or off.

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands