OR
Select
Redo
to decline all measurements and to repeat all calibration
runs.
5.5
Adjusting the Circular Level of the Instrument and Tribrach
3
3
0016437_001
1
1.
Place and secure the instrument into the tribrach and onto a tripod.
2.
Using the tribrach footscrews, level the instrument with the elec-
tronic level.
Select
Settings
\
TS instrument
\
Level & compensator
to access
the
Level & Compensator
panel.
3.
Check the position of the circular level on the instrument and tri-
brach.
4.
a
If both circular levels are centred, no adjustments are neces-
sary
b
If one or both circular levels are not centred, adjust as follows:
Instrument
: If it extends beyond the circle, use the supplied allen
key to centre it with the adjustment screws. Turn the instrument by
200 gon (180°). Repeat the adjustment procedure if the circular
level does not stay centred.
Tribrach
: If it extends beyond the circle, use the supplied allen key
to centre it with the adjustment screws.
☞
After the adjustments, all adjusting screws must have the same tight-
ening tension and no adjusting screw should be loose.
Adjusting the circular
level step-by-step
Check & Adjust
43
Summary of Contents for FlexLine TS10
Page 1: ...Leica TS10 User Manual Version 1 0 English...
Page 63: ......
