CS25 (GNSS/LRBT) plus, Operation
20
4.1.3
Attaching the L1/L2 GNSS Helix Antenna
Attach Helix
antenna step-by-
step
Valid for CS25 GNSS plus only.
4.2
Power Functions
Turning tablet
computer on step-
by-step
Turning tablet
computer off step-
by-step
Step
Description
Ensure that the Helix antenna connector and the linkage on the backside of
the CS25 GNSS plus is free of dust and grease.
1.
Turn over the CS25 GNSS plus tablet computer to the underside.
2.
Hold the Helix antenna at the end of the antenna connector.
3.
Insert the antenna connector into the female connector on the CS25 GNSS
plus until it clicks into place.
004738_001
1
2
Step
Description
1.
Place the tablet computer on a flat and stable surface or hold the tablet
computer in your hand.
2.
Ensure that the tablet computer is either connected with the AC power
adapter or the batteries are charged up.
3.
Press and hold power key (
) for 5 s.
Step
Description
1.
Use the “Shut Down” command of your operating system to turn off the
tablet computer.
Wait for at least five seconds after turning off the tablet computer
before turning it back on.
