CS25 (GNSS/LRBT) plus, Operation
17
4
Operation
4.1
Equipment Setup
4.1.1
Fixing the Display Foil to the CS
Fixing the display
foil to the CS25 plus
tablet computer
step-by-step
4.1.2
Inserting and Removing a SIM Card and SD Card
• Keep the card dry.
• Use it only within the specified temperature range.
• Do not bend the card.
• Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the card.
CAUTION
Always ground yourself to remove any static charge before touching the CPU card. The
electronic devices are sensitive to static electricity.
Precautions:
1) Only experienced personnel should open the mechanical housing of the tablet
computer.
2) Use a grounding wrist strap all the time.
3) Place all the electronic components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
Step
Description
Ensure that the display of the CS25 plus is free of dust and grease.
The non-reflecting display foil has a silver-coloured sticker to peel away the
carrier foil from the actual display foil.
1.
Touch the silver-coloured sticker with two fingers and pull it slowly upwards.
The carrier foil is peeling away.
Do not peel the carrier foil more than 2 cm - 3 cm away.
2.
Fix the laid open adhesive underside of the display foil at the display border.
Pay attention that the display foil is not fixed between display and
display frame.
3.
Peel away the carrier foil bit by bit and smooth it out slowly onto the display.
4.
Potential air bubbles between display and display foil have to be smoothed
out using the included microfibre cloth.
Do not use sharp objects!
1
2
CS25_005
3
4
