19
Leica CM1510 S – Cryostat
The handwheel and all hardware
items needed to attach it to the cry-
ostat are packed in the accessory
box. The handwheel can be dis-
mounted e.g. for transport through
narrow doors.
•
Insert the pin (
1
) of the handwheel shaft
into the bore (
2
) of the handwheel.
•
Place spring washer (
3
) onto screw (
4
) with
the curved surface pointing to the right side
(see also Fig. 6).
•
Tighten screw (
4
) with the size 6 Allen key.
To disassemble, proceed in reverse order.
The protective foam parts between
microtome and compressor MUST be
removed prior to operating the instru-
ment (see Fig. 7)!
Caution! Edges of gilled evaporator
are extremely sharp! High risk of in-
jury!
4.4
Fastening the handwheel
1
2
3
4
Fig. 6
5
Fig. 7
4.
Setup
The handwheel is lockable with the handle in
the upper position.
